Streaming Media Internet Speeds

streaming media internet speedThe thing about Internet-delivered TV is that you need a broadband connection that’s fast to work with the streaming lifestyle. This may seem like a foregone conclusion, but I want to make it clear that if you’re going to bet your entertainment future on your network, you best have a solid hookup. Netflix and other similar streaming video services suggest downstream speeds of 5 Mbps, but that’s simply not going to cut it for most folks, especially those with families that might want to stream more than one show or movie at a time, and then let’s add on 4 phones, 2 laptops and a tablet all using the internet at once.

Consider that 5 Mbps may get you one HD video stream, but you may experience loading and buffering delays if your network is getting choked up with any other traffic. Cable TV doesn’t interrupt your show to buffer, so when new cord-cutters are confronted with delays, they are understandably frustrated. Avoid the buffer and upgrade your broadband speed if you can, otherwise it’s time to reconsider ditching cable.

We also recommend testing your Internet speed at peak streaming hours (between 6 – 10 PM weekdays) to determine if your neighborhood struggles under the strain of heavy traffic. For instance, if you routinely get around 10Mbps downloads during the day, but that figure takes a dive to about 3 MBps around dinner time, you’ll want to call your Internet provider to see if anything can be done. Fortunately, this is an increasingly rare problem, but better to check ahead.

Of course, if you’re looking to get into the streaming big leagues to access the growing array of 4K Ultra HD streaming content available, you’ll want to raise the stakes even higher when it comes to broadband speed. For streaming services like Netflix, YouTube, and KODI you’ll likely want to have at least 25Mbps on hand (which is what Netflix explicitly recommends). If you’re only going to be downloading 4K content from sites like MGO or Ultraflix, 10Mbps will probably suffice. In any event, fast and reliable Internet is an integral key to a positive streaming experience. When I got rid of my triple play from Comcast. I went for the 150mb speed with boost for $84 a month. Before that I was paying $250 a month.

Wifi vs. Ethernet

The cable plan you signed up for promised up to 300Mbps of blistering Internet speed, but reality has proven to be somewhat different. You’re barely topping 25Mbps, Netflix doesn’t work upstairs and by 7p.m., no one seems to be able to stream anything at all.

It’s quite possible to boost your Wi-Fi speed yourself, although the solution could be as simple as moving your router or as persnickety as switching Wi-Fi frequencies.

“The distance between the router and connecting devices, as well as the number of walls and floors in between, make a big difference,” says Spencer Behroozi, vice president of product management at modem manufacturer Actiontec. While a Wi-Fi signal can travel hundreds of feet in an unobstructed space, walls and floors can cut that distance by half or more.

Your connection speed can also be influenced by your router—how old it is, how good its processor and antenna are, how good it is at picking up wireless signals and how many devices are using it.

In some cases, your connection speed may even come down to your service provider’s preference for certain kinds of traffic. Behroozi says service providers prioritize voice traffic first, then their own video services.

What actions can you take to increase your Wi-Fi performance and get your streaming speed back up to par?

1. Check the router

The Old Faithful of personal technology issues is often your best bet. According to Behroozi, the IP connection between your device and the router or between the router and Internet can get hung up. “A restart of the router reboots all its systems, including the network processor and wireless radios,” he says.

If your router has a reset button, hold it down for a few seconds. If not, restart it by removing the cable from the power socket, waiting half a minute and then plugging it in again.

If that doesn’t work, check to make sure the router firmware is up to date. Look for the update option under “System” in router software you have installed on your computer. Only download router firmware updates from the manufacturer’s website.

You may also find  the resetting and reinstalling your router may do the trick. For most routers this is accomplished by holding down the reset button and then reinstalling the software.

2. Move the router

“Most good routers have antennas that try to provide a symmetrical ‘donut‘ of Wi-Fi coverage, so when possible, place the router in an open space centrally located in your house, equidistant from its farthest locations,” Behroozi says.

The materials surrounding the router matter as well. Metal interferes with Wi-Fi signals, while wood does not. According to HowToGeek , positioning the router’s antenna vertically rather than horizontally also increases signal strength.

3. Check to see if other family members are streaming or torrenting

Intensive activities like streaming HD video or file sharing can take its toll on Internet speed. “Routers can support hundreds of devices connecting, but it’s more about what each device is doing online,” Behroozi says. “For example, if someone is using BitTorrent or if everyone is watching Netflix at the same time, this can cause an overall lag in speed.”

Distance from the router is important as well. If four people are streaming video but they’re all close to the router, you may not experience any slowdowns, Behroozi says. So if everyone simply must watch Netflix or play Halo separately and simultaneously, try to move the devices closer to the router with as little wall or floor obstructing the path as possible.

4. Check if your ISP is having a hard time keeping up

One bottleneck is how good the service from your service provider is. “A lot of ISPs oversubscribe, so you can feel the lag in the afternoon when everyone gets home,” Behroozi says.

Test your connection by running a speed test from a site such as SpeedTest.net at different times during the day. “You don’t want it fluctuate too much over the course of a day. The speed should always be at least 80 to 90 percent of what your service provider promises,” Behroozi says. If that’s the case but you’re still not satisfied …

5. Run a ping test

While a speed test gauges the speed possible based on available bandwidth from the service provider, a ping test gauges latency, which is the delay in communication between your computer and a particular website on the Internet. It can tell you how good the quality of your Internet connection is.

Head to PingTest.net, where you’ll receive a ping figure measured in milliseconds. In general, lower numbers are better, but the site also gives you a grade from A to F to show how suitable your connection is for streaming and online gaming.

6. Check to see if you’re on an overcrowded channel

Slow Wi-Fi speeds may be the result of interference from your neighbors’ Wi-Fi networks as all the devices compete to use the same channel.

All routers support the 2.4Ghz frequency, which distributes traffic among a handful of channels. Dual-band routers also support the newer 5GHz frequency, which contains even more channels. That frequency tends to be less congested and therefore usually allows faster connections.

You may be able to increase your speed by switching to a less busy channel, not matter which frequency you’re on. Download a wireless channel analyzer app such as Wifi Analyzer for Android (no equivalent for non-jailbroken iPhones) or a desktop program such as NirSoft’s Wi-FiInfoView for Windows. Macs have the tool built in; hit Option and tap the wireless icon in your top toolbar, then click Open Network Diagnostics.These programs show each channel on each Wi-Fi frequency and which ones nearby networks are using.

7. Switch to a different channel

If you discover you’re on an especially crowded channel, you can manually change it. Type your router’s IP address into your web browser. (The IP address is usually on the back of the router, or you can google your router’s model.) You’ll be prompted to enter your username and password, after which you can click through to Wi-Fi settings and select the channel recommended by your Wi-Fi analyzer program.

8. Check for interference from a nearby cordless device

Baby monitors, older cordless phones, microwave ovens and wireless speakers are just some of the common household gadgets that also use the 2.4Ghz frequency. These can interfere with the wireless signal from your router.

Deal with the conflict by moving the router away from these devices and ensuring that no devices that could potentially interfere lie in a straight line between your router and the gadget you’re trying to get online with.

9. Get a wireless signal extender

“When you start looking at homes larger than 3,000 square feet, getting good Wi-Fi signal from one corner to another can be a challenge,” Behroozi says. Multistory houses pose an obstacle as well, if the router isn’t plugged into the broadband line somewhere in the middle.

In these cases, you could benefit from using a wireless extender. A signal extender plugs into any mains socket to rebroadcast and boost your Wi-Fi signal to those hard-to-reach places.

We’ve also found the Eero Home Wi-Fi System ($349 for a two pack, $499 for a three pack) to be a good solution in our testing. It’s a router that comes with extenders that piggyback on one another using an internal mesh network to get the best throughput throughout your home. We found speeds equal to those of the router throughout our test home.